Catalogue Ref. 005
Split Docking Gearbox
- Ratio1:8.6
- Torque30 N·m
- Axle800–1300 mm
- Motor120-type, 350–1200 W
Product Family
Electric Tricycle Docking Gearbox
Split and all-in-one docking layouts for rear axle integration.
electric tricycle docking gearbox
Electric Tricycle Docking Gearbox | Catalogue Ref. 005/006/009/010
Docking models are grouped by how the gearbox mates with the axle assembly. The catalogue includes both 1:8.6 units and later models using multi-ratio gear-pair notation.
Models4
Ratio range1:8.6, 1:8.3/20, 1:9.3/23, 1:11/28
Torque range30 N·m – 30 N·m
Motor range120–1200 W
Catalogue Models
Compare the available catalogue configurations
| Model | Catalogue ratio | Max input torque | Half-shaft teeth | Rear axle fitment | Rated power | Rated voltage |
|---|---|---|---|---|---|---|
| Catalogue Ref. 005 Split Docking Gearbox | 1:8.6 | 30 N·m | 16 / 18 | 800–1300 mm | 120-type, 350–1200 W | 40 / 60 / 72 V, 12 / 18 / 24 tubes |
| Catalogue Ref. 006 All-in-One Docking Gearbox | 1:8.6 | 30 N·m | 16 / 18 | 1000–1300 mm | 120-type, 350–1200 W | 48 / 60 / 72 V, 12 / 18 / 24 tubes |
| Catalogue Ref. 009 All-in-One Docking Gearbox (New) | 1:8.3/20, 1:9.3/23, 1:11/28 | 22 N·m | 16 / 18 | 1000–1100 mm | 120-type, 350–800 W | 40 / 60 V, 18 / 24 tubes |
| Catalogue Ref. 010 All-in-One Docking Gearbox | 1:8.3/20, 1:9.3/23, 1:11/28 | 30 N·m | 16 / 18 | 1000–1200 mm | 120-type, 350–1000 W | 48 / 60 / 72 V, 18 / 24 tubes |
The ratio strings are reproduced from the catalogue. Confirm the internal gear pair, output direction, axle interface and approved drawing before ordering.
Product Views
Model configurations in this family
Catalogue Ref. 006
All-in-One Docking Gearbox
- Ratio1:8.6
- Torque30 N·m
- Axle1000–1300 mm
- Motor120-type, 350–1200 W
Catalogue Ref. 009
All-in-One Docking Gearbox (New)
- Ratio1:8.3/20, 1:9.3/23, 1:11/28
- Torque22 N·m
- Axle1000–1100 mm
- Motor120-type, 350–800 W
Catalogue Ref. 010
All-in-One Docking Gearbox
- Ratio1:8.3/20, 1:9.3/23, 1:11/28
- Torque30 N·m
- Axle1000–1200 mm
- Motor120-type, 350–1000 W
Selection Factors
Match the gearbox to the vehicle, not only the motor wattage.
Confirm the docking face, bolt pattern, center distance, shaft or spline details and installation orientation. The model name alone is not enough to establish interchangeability.
- Motor voltage, rated power and input speed
- Rear axle width and half-shaft tooth count
- Required road speed, climbing duty and payload
- Mounting side, housing outline and cable or shifter layout
Typical application checks
- Rear axle conversions
- New integrated electric tricycle drivetrains
- Applications requiring a defined docking interface
Final suitability depends on the complete vehicle duty and confirmed interfaces.
Buyer Questions
Frequently asked questions
Do all docking models use ratio 1:8.6?
No. Catalogue Ref. 005 and Catalogue Ref. 006 list 1:8.6, while Catalogue Ref. 009 and Catalogue Ref. 010 use the catalogue multi-ratio notation.
Which docking model has the widest power range?
The catalogue lists Catalogue Ref. 005 and Catalogue Ref. 006 up to 1200 W. Confirm motor speed and load before selection.
What should I measure at the docking face?
Measure the pilot diameter, bolt circle, bolt sizes, face-to-shaft distance, shaft or spline and the complete housing clearance envelope.